123 HP Officejet Pro 8710 Printer Wireless Setup

123.hp.com/ojpro8710 wireless setup

Procedures for 123 HP Officejet Pro 8710 Printer Wireless Setup

  • HP Officejet Pro 8710 Wireless protected Setup
  • HP Officejet Pro 8710 Automatic Wireless Connect
  • HP Officejet Pro 8710 Wireless Setup Wizard
  • HP Officejet Pro 8710 Connect using USB Port

123 HP Officejet Pro 8710 Wireless Protected Setup

123 HP Officejet Pro 8710 WPS Setup for MAC

Procedure is same for mac with slight change during installation

Step 1: Installation Preparation

Initially switch on the printer, computer, and the router. And then setup the 123 hp ojpro8710 printer.

  • You need some required items such as:
    • Network name: Service Set Identifier (SSID)
    • Network password: WEP key or WPA security password.
    • A computer should have wireless network access.
  • Ensure that the router and computer are connected to the printer on the same wireless network in which you want to print. And all setup is within the range of the router.
  • Pull out any USB or Ethernet cables from the printer, if necessary.

Step 2: Connection with wireless network

  • From the 123 HP Officejet Pro 8710 printer’s control panel, scroll down to open the Dashboard, then press the Wireless icon.
  • Touch the Setup icon, Wireless Settings, and then Wireless Setup Wizard
  • Select your network from the list and then touch OK.
  • If not then touch Enter New Network Name, and follow the on-screen steps to enter your network name.
  • Enter the WEP or WPA password key, click Done and then touch OKto return back to the home screen.

Step 3: Download and install the driver

Always download and install the advanced version of printer’s full-featured software from hp official website.

  • Turn on the hp ojpro8710 printer and unplug the USB connection.
  • Select your printer from the available list
  • When the screen gets prompted, choose a method to identify your printer model, then stick to on-screen instructions to go to the download page.
  • Click Download which is next to HP Easy Start or next to the full feature driver, based on the option.
  • To begin the installation, Open the Downloads folder on Mac dock, and click the HP Easy Start file or the full feature driver .dmg file.
  • By following the on-screen instructions set up the printer connection and install the advanced software and click Add Printer to create a print queue on the Mac.
  • To the Add window, click your 123 HP Officejet Pro 8710 printer and then click the User Print Using menu, again choose your printer the from the pop-up menu, and then click Add.
  • Then return back to the 123 Hp installer to finish the installer.

123 HP Officejet Pro 8710 WPS Setup for Windows

Step 1: Installation Preparation

Initially switch on the printer, computer, and the router. And then setup the printer.

  • You need some required items such as:
    • Network name: Service Set Identifier (SSID)
    • Network password: WEP key or WPA security password.
    • A computer should have wireless network access.
  • Ensure that the router and computer are connected to the printer on the same wireless network in which you want to print. And all setup is within the range of the router.
  • Pull out any USB or Ethernet cables from the printer, if necessary.

Step 2: Connection with wireless network

  • From the printer’s control panel, scroll down to open the Dashboard, then press the Wireless icon.
  • Touch the Setup icon, Wireless Settings, and then Wireless Setup Wizard
  • Select your network from the list and then touch OK.
  • If not then touch Enter New Network Name, and follow the on-screen steps to enter your network name.
  • Enter the WEP or WPA password key, click Done and then touch OKto return back to the home screen.

Step 3: Download and install the driver

Always download and install the advanced version of printer’s full-featured software from hp official website.

  • Turn on the printer and unplug the USB connection.
  • Please enter your printer model number without any change, and then click Begin.
  • Click Download, then click Open, Save, or Run in any windows which display to download the driver to your computer.
  • Double-click to the driver file in the browser downloads bar or in the Downloads folder on the computer to carry on the driver installation process.
  • Strictly Follow the on-screen instructions to finish the connection setup and driver installation.
  • Return back to the 123.hp.com page in your web browser to completely finish the printer registration and activation process.

123 HP Officejet Pro 8710 Automatic Wireless Connect

HP Auto Wireless Connect is a technology that helps in connecting your printer to the wireless network without using USB or network password or username. Not all computers or network configurations are compatible.

Requirements for compatibility with HP auto wireless connect

  • All advanced versions of Windows and Mac Os are accepted.
  • Using network should be above 2.4 GHz. And they do not enable 5.0 GHz.
  • Make sure that your computer does not use a static IP address.
  • Once when the auto wireless is connected, it will be in on mode for two hours. If not enabled restore it
  • If the 123 HP auto wireless connection was advised you to during the installation process then it is the suggested setup for your 123.hp.com/ojp8710 printer.
  • The setup may sometimes need disconnection of network temporarily. So, save your online works, to make no loss.

To use Auto Wireless, connect option, do the following steps:

  • Install the advanced software for your 123 HP printer and follow the procedures.
  • First, choose the network connection type and click yes to make the wireless setting to the printer.
  • Only certain computers and network configurations are compatible with 123 HP Auto Wireless Connect.
  • If it is not compatible opt for another wireless setup method.

But it should have met the required conditions,

  • Ensure your computer uses advanced Windows Vista (newer) and Mac OSX 10.5 (newer).
  • Make sure that the operating system is under the control of wireless adapter so that 123 HP software can restore the computer current network settings.
  • Now your computer is connected to your wireless network over 2.4 GHz.

Using router connect your HP Officejet Pro 8710 Printer

  • HP Printers are strictly not compatible with 5.0 GHz networks except 2.4 GHz. But you can able to connect the 123 HP printer to your network with the help of other methods.
  • The 123 HP Officejet Pro 8710 Printer will be in the auto wireless mode for two hours.
  • If HP Auto Wireless Connect is suggested during the installation of your 123 HP printer, then it is an advised setup method.
  • Temporary disconnection is required for some setup process.
  • Ensure you save all your online work and downloads before proceeding with this setup method.

Need Technical Support Call us @ our Toll-Free: 1 844 687 6686

123 HP Officejet Pro 8710 Wireless Setup Wizard

Step 1: Prepare for installation

  • Before setting up the printer to your wireless network you require some information for installation.
    • Network name: The network name is the SSID(Service Set Identifier).
    • Network password: WEP key or WPA security password.
    • Your computer should be enabled with the network connection
    • Need flow of internet access
  • Ensure that your router and computer are turned on, and they are connected with the same network to which your printer gets connected.
  • Keep your hp ojp8710 printer, a computer within range of the router while the setting up.
  • Disable any USB or Ethernet cables from the printer.

Step 2: Connect to the wireless network

  • Ensure whether your HP Officejet Pro 8710 printer is on.
  • Open the Control Panel onto your printer. Now on the dashboard scroll down to see the option
  • Select Wireless Settings and Wireless Setup Wizard option.
  • Now the Wireless Setup Wizard displays a list of wireless networks in range.
  • Select your Network Name from the available list and enter your WEP or WPA key password.
  • If your wireless network isn’t listed, you can enter your network information manually.
  • Then click done and return to the home screen.

Step3: Downloading and Installing the driver.

To install the driver visit 123.hp.com/ojp8710 or 123.hp.com/ojpro8710 and download the required advanced software for using wireless wizard option for operating the printer.

Always download and install the newer and advanced version to your computer based on the type of printer you have. You can also use the cd ROM / DVD for installation purpose that is provided along with the printer package. Follow the procedures and stick onto the on-screen instruction to install in a perfect way.

123 HP Officejet Pro 8710 Connect using USB Port

Install the required advanced software and driver for USB connection.

  • Turn on your 123 hp ojp8710 printer and make sure that it is not connected to your computer using USB cable or port.
  • If your printer is connected to the computer using USB then disable it immediately from the computer.
  • Go to the official website of your 123 HP Officejet Pro 8710 printer and download the software using the instructions that get displayed on the screen.
  • If needed, type in your printer’s model number in the required field to identify your printer model and proceed to download the software.
  • Now Connect the printer end of the USB cable to the USB port on the side of the printer.
  • Connect the other end of the USB cable to the USB port on the computer.